Instrument Procedures

RNAV Approach Types | Instrument Procedures

Flying Training, Instrument Procedures

RNAV encompasses a variety of underlying navigation systems and, therefore, approach criteria. This results in different sets of criteria for the final approach segment of various RNAV approaches. RNAV instrument approach criteria address the following procedures: GPS overlay of pre-existing nonprecision approaches. VOR/DME based RNAV approaches. Stand-alone RNAV (GPS) approaches. RNAV (GPS) approaches with vertical […]

RNAV Approach Types | Instrument Procedures Read Post »

Types of Approaches | Instrument Procedures

Flying Training, Instrument Procedures

In the NAS, there are approximately 1,105 VOR stations, 916 NDB stations, and 1,194 ILS installations, including 25 LOC-type directional aids (LDAs), 11 simplified directional facilities (SDFs), and 235 LOC only facilities. As time progresses, it is the intent of the FAA to reduce navigational dependence on VOR, NDB, and other ground-based NAVAIDs and, instead,

Types of Approaches | Instrument Procedures Read Post »

Descent Rates and Glidepaths for Nonprecision Approaches

Flying Training, Instrument Procedures

Maximum Acceptable Descent Rates Operational experience and research have shown that a descent rate of greater than approximately 1,000 fpm is unacceptable during the final stages of an approach (below 1,000 feet AGL). This is due to a human perceptual limitation that is independent of the type of airplane or helicopter. Therefore, the operational practices

Descent Rates and Glidepaths for Nonprecision Approaches Read Post »

Descents | Instrument Procedures

Flying Training, Instrument Procedures

Stabilized Approach In IMC, you must continuously evaluate instrument information throughout an approach to properly maneuver the aircraft or monitor autopilot performance and to decide on the proper course of action at the decision point (DA, DH, or MAP). Significant speed and configuration changes during an approach can seriously degrade situational awareness and complicate the

Descents | Instrument Procedures Read Post »

Instrument Approach Procedure (IAP) Briefing

Flying Training, Instrument Procedures

A thorough instrument approach briefing greatly increases the likelihood of a successful instrument approach. Most Part 121, 125, and 135 operators designate specific items to be included in an IAP briefing, as well as the order in which those items are briefed. Before an IAP briefing can begin, flight crews must decide which procedure is

Instrument Approach Procedure (IAP) Briefing Read Post »

Vertical Navigation | Instrument Procedures

Flying Training, Instrument Procedures

One of the advantages of some GPS and multi-sensor FMS RNAV avionics is the advisory VNAV capability. Traditionally, the only way to get vertical path information during an approach was to use a ground-based precision NAVAID. Modern RNAV avionics can display an electronic vertical path that provides a constant-rate descent to minimums. Since these systems

Vertical Navigation | Instrument Procedures Read Post »

Enhanced Flight Vision Systems (EFVS) and Instrument Approaches

Flying Training, Instrument Procedures

An Enhanced Flight Vision System (EFVS) is an installed aircraft system which uses a head up display (HUD), or an equivalent display that is a head up presentation, to combine aircraft flight information and flight symbology, navigation guidance, and a real-time image of the external scene to the pilot on a single display. [Figure 1]

Enhanced Flight Vision Systems (EFVS) and Instrument Approaches Read Post »

Instrument Procedures: A Comprehensive Resource for IFR Operations

Flying Training, Instrument Procedures

Pilots using the National Airspace System (NAS) and operating under Instrument Flight Rules (IFR) can find a thorough technical reference in the Instrument Procedures section. This section presents advanced principles and guidelines for IFR operations in addition to building upon the knowledge covered in the Instrument Flying section. This area will prove to be an

Instrument Procedures: A Comprehensive Resource for IFR Operations Read Post »

Altitudes | Instrument Approaches

Flying Training, Instrument Procedures

Prescribed altitudes may be depicted in four different configurations: minimum, maximum, recommended, and mandatory. The U.S. Government distributes approach charts produced by the FAA. Altitudes are depicted on these charts in the profile view with an underscore or overscore, or both to identify them as minimum, maximum, or mandatory, respectively. Minimum altitudes are depicted with

Altitudes | Instrument Approaches Read Post »

Scroll to Top